|Dimensions||8 × 3 × 6 in|
Attaches heavy gauge 20-8 ga. metal to metal. Hex head framing screw used in heavy gauge metal to metal applications where high torque is required.
Use a standard screwgun with a depth-sensitive nose piece.
Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 2,500.
The hex head is fully seated when the head is flush with the work surface.
Overdriving my result in fastener failure or strip out of the work surface.
The fastener must penetrate beyond the metal three full thread pitches.
Grabber’s 10, 12 & 14 gauge zinc-plated drill point fasteners are manufactured in ISO 9002 factories, plated as prescribed in the ASTM F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners, and post-plating baked according to the process articulated in SAE AMS 2759/9, Hydrogen Embrittlement Relief (Baking) of Steel Parts, Section 220.127.116.11, and SAE J78, which calls for a four-hour minimum time for baking out entrapped hydrogen after acid treating the parts.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.
There are no reviews yet.