|Dimensions||8 × 6 × 3 in|
6 x 1-5/8-in, Bugle Head, Fine Thread, Phosphate, 5-lb
Attaches gypsum board to wood or light gauge steel. With a super sharp 23° Streaker point and 15 threads per inch, you get quick and easy penetration into wood or 20-25 gauge metal studs.
Use a standard screw gun with a depth-sensitive nose piece.
Suggested screw gun specification for optimal performance – 4 amps minimum and RPM range of 0 to 4,000.
The head is fully seated when the head is flush with the work surface.
Overdriving my result in fastener failure or strip out.
The fastener must penetrate beyond the metal three full thread pitches.
All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.
Out of stock