|Dimensions||36 × 14 × 1 in|
|Size (Duct Opening)|| |
30" x 8"
|Boot Duct|| |
30" x 8"
|Drywall Opening|| |
29-1/2" x 9-3/4"
|Vent Cover|| |
29-⅜” x 11”
|Vented Opening|| |
27-¾” x 8”
Envisivent Removable Flush Mount Ceiling/Wall Air Supply, 30” x 8” (Duct Opening)
|Size (Duct Opening): 30" x 8"|
When designing a room that requires a large air return vent, the only options you had to choose from were steel or plastic vent covers that protruded from the wall, standing out, instead of blending in, with visible screws to hold the vent in place. The cover is flush mount, completely removable, primed, and ready to paint once installed.
Envisivent vent covers fit the depth of standard drywall creating a completely flush mount finish. Easy to install, simply tape, mud, sand, and then paint directly over the already primed vent cover for that blended look you want for every room of your house.
- 36 directionally angled vented air slots
- Moisture, mold, and water-resistant
- Machine-beveled outer edges for seamless finishing
- Primed and ready to paint
- General Overall Dimensions: 32” x 12-¼” x ½” (813mm x 311mmx 12mm)
- Vented Opening Dimensions: 27-¾” x 8” (704mm x 203mm)
- Frame material: Satin Coat Galvanized Steel
- Panel Material: Triple Fibre Reinforced Cement Board
These Vents Replace Your Standard Vent Covers and are Designed to be Installed Into a Drywall Opening. They are Not Designed to Sit Inside of a Register Box– Please See ‘Drywall Opening’.
Please Follow the Installation Guide Below.
Please Read Spec Sheet & Product Attributes Before Buying.
Appearance is very minimal yet classical. No more ugly grates.