7 x 7/16-in, Pan Head, Vector™ Point, Streaker®, Phosphate, 5-lb
Out of stock
Grabber’s new Vector screw significantly reduces drive time and increases productivity with its much sharper and steeper-angled point compared to traditional framing fasteners. Competitive tests have demonstrated that Vector point screws drive up to eight times faster than IFI SAE J78 fastener penetration standards and 50% faster than competing fasteners. In a drive comparison with standard framing fasteners, the VectorTM performed considerably better across the board in multiple drive test comparisons.;;CUT DRIVING TIME IN HALF;Designed specifically for metal framing, the Vector™ fastener drives through light-gauge metal with ease. Competitive tests compared the Vector™ screw against 9 other fasteners through two layers of 25-gauge metal—and the results were dramatic. The Vector™ screw performs eight times faster than IFI SAE J78 penetration standards—and 50% faster than the average time for other fasteners.;;Specifications:;Gauge: #7;Length: 7/16″;Head Type: Pan Head;Recess Type: #2 Phillips;Thread Type: Twin lead;Coating: Gray phosphate;Point: Vector Point;;Installation Guidelines:;Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 4,000.;The pan head is fully seated when the head is flush with the work surface.;Overdriving my result in fastener failure or strip out.;The fastener must penetrate beyond the metal three full thread pitches.;All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.