Akfix 960P Adhesive PU Gun Foam 850G

Introducing the Akfix 960P Adhesive PU Gun Foam—a one-component aerosol polyurethane adhesive foam that cures swiftly with moisture. This high-performance adhesive is specifically designed for bonding various construction materials, making it especially suitable for heat insulation systems.

Akfix 960P Adhesive PU Gun Foam 850G Key Features

• Powerful Adhesion: Effectively bonds polystyrene heat panels (XPS and EPS) to surfaces, ensuring a secure and lasting attachment.
• Fast Curing Time: Achieves instant adhesion with wall plugging possible within two hours, expediting project timelines.
• High Yield Efficiency: Each can covers up to 14 m² of heat insulation panels, offering an economical solution for large-scale applications.
• Minimal Expansion: Exhibits minimal expansion during the curing process, preventing deformation of panels and ensuring a smooth finish.
• Lightweight Composition: Adds minimal weight to structures compared to traditional plaster, reducing structural load without compromising performance.
• Versatile Application Conditions: Usable at temperatures as low as 0°C, allowing for flexibility across various environmental conditions.
• Eco-Friendly Formula: Free from propellant gases harmful to the ozone layer, aligning with environmental safety standards.

Akfix 960P Adhesive PU Gun Foam 850G Application Areas

• Mounting Heat Insulation Panels: Ideal for installing polystyrene (XPS and EPS) panels in thermal insulation systems.
• Bonding Diverse Materials: Suitable for adhering wooden construction materials to concrete, metal, and other substrates.
• Minimal Expansion Applications: Perfect for projects requiring controlled expansion to maintain structural integrity.
• Door and Window Frame Installation: Provides effective mounting and insulation for frames, enhancing energy efficiency.

How to Use Akfix 960P Adhesive PU Gun Foam 850G

1. Preparation: Ensure surfaces are clean, free of oil, dust, and loose particles. Slightly moisten surfaces to improve adhesion.
2. Can Preparation: Shake the can vigorously for at least 30 seconds before use.
3. Application:
   • Attach the can to a compatible applicator gun securely.
   • Hold the gun with the can upside down during application.
   • Apply a uniform bead of foam to the substrate. For panel installation, apply the foam around the perimeter and in vertical lines at 30-40 cm intervals.
   • Press the panel firmly into place within 10 minutes of application. Use mechanical fasteners if necessary until the adhesive cures.
4. Curing: The foam becomes tack-free in approximately 10 minutes. Full curing occurs within 24 hours, depending on ambient conditions.
5. Post-Application:
   • Remove any excess cured foam mechanically.
   • Protect the cured foam from UV exposure by covering it with suitable materials or coatings.
6. Cleaning: Uncured foam can be cleaned with Akfix Foam Cleaner. Once cured, the foam can only be removed mechanically.

For a visual demonstration of the application process, you may find the following video helpful:

Enhance your construction projects with the Akfix 960P Adhesive PU Gun Foam—engineered for efficiency, strong adhesion, and versatility across various applications.